ADR440BRZ-REEL7 Information

Thermal Diodes Temperature Sensing Solutions

Analog Devices Thermal Diodes Temperature Sensing Solutions prove extremely useful in monitoring temperature limits. Thermal diodes are based on the principle that electric diodes change voltage linearly according to temperature. When a thermal diode's temperature increases, the forward voltage decreases. Designers can determine the junction temperature of a device by passing a current through the diode and measuring the resulting voltage. Thermal diodes can be embedded on microprocessors to monitor the processor's die temperature. The thermal diodes are placed in the processor core where the highest temperatures occur. Because of this placement, thermal diodes provide very precise CPU temperature measurements.Learn More

Lithium Ion Battery Formation and Test Solutions

Analog Devices Lithium Ion Battery Formation and Test Solutions offer a small, environmental friendly system for testing and formation rechargeable battery cells and packs. The offering uses a PWM controller to provide the charging energy. With these solutions, designers can direct discharging energy to other cells or send the energy back to the grid to minimize energy usage.Learn More

Thermocouple Temperature Sensing Solutions

Analog Devices Thermocouples (TCs) are the most widely used sensors and have the most extensive measurement range (-200ºC to +1800ºC). Thermocouples produce small magnitudes of voltage, and therefore require precision amplification for precise temperature measurements. TCs are useful for taking temperature measurements in harsh environments with extremely high temperatures. The devices are ideal for flame temperatures, gas/electric ovens, and heating systems.Learn More

Silicon Sensor Solutions

Analog Devices Silicon Sensors offer a complete, linear, factory-calibrated signal-chain solution over a –55ºC to +150ºC temperature range with up to a ±0.25°C accuracy rating. The silicon sensor solution includes digitation via an integrated ADC. This plug-n-play solution allows the designer to tailor the required accuracy to the application cost.Learn More

Temperature Sensing Interface Solutions

Analog Devices Temperature Sensing Interface Solutions includes an extensive line of thermocouples, resistance temperature detectors (RTDs), thermistors, thermal diodes, and silicon sensors to meet a wide range of temperature and accuracy requirements.Learn More

ADR44x XFET Voltage References

Analog Devices ADR44x XFET® Voltage References offer ultra-low noise, high accuracy, and low-temperature drift performance. Developed using Analog Devices  patented temperature drift curvature correction and XFET (eXtra implanted junction FET) technology, voltage change vs. temperature nonlinearity in the ADR44x is greatly minimized. The XFET references provide better noise performance than buried Zener references. The XFET references operate off low-supply voltage headroom (0.5V). This combination  makes the ADR44x Voltage References ideally suited for precision signal conversion applications in high-end data acquisition systems, optical networks, and medical applications. The ADR44x XFET® Voltage References have the ability to source up to 10mA of output current and sink up to −5mA. The voltage references come with a trim terminal to adjust the output voltage over a 0.5% range without compromising performance. Learn More

Resistance Temperature Detector Solutions

Analog Devices Resistance Temperature Detector (RTDs) Solutions feature the most accurate and stable temperature sensors. The RTDs provide a near linear response over the entire -200ºC to 850ºC temperature range. RTDs are used almost exclusively in calibration/standards applications. These devices require a precision reference resistors or a good excitation current. Any errors in the analog input voltage due to the temperature drift of the RTD current source are compensated by the variation in the reference voltage. The offering includes 2-, 3-, or 4-wire types.Learn More

Power Management ADI SLP

Thermistor Temperature Sensing Solutions

Analog Devices Thermistor Temperature Sensing Solutions feature small temperature sensors that operate from 0ºC to 30ºC with a nominal resistance of 1kΩ or higher. The thermistors require a reference resistor and are typically used in cold-junction compensation. Analog Devices Thermistors have simple 2-wire implementation and fast response times. The thermistors are ideal for applications such as freezers and incubators.Learn More

Specifications

ADR440BRZ-REEL7 Price & Stock

Analog Devices ADR440BRZ-REEL7 pricing and available inventory.

AD5242BRUZ1M distributor

Alternate Names

Analog Devices has several brands around the world that may have alternate names for ADR440BRZ-REEL7 due to regional differences or acquisition. ADR440BRZ-REEL7 may also be known as the following names: